[WELL Lab] Air Filtration Systems: Combining Particulate and Chemical Stages

Air filtration is often treated as "buying a filter". It is really about system staging.

The reason is simple: particles and gases are two different contaminants requiring two different mechanisms.

◆ ◆ ◆

Particulate vs chemical filtration

  Particulate Chemical
Target Dust, smoke, microbes, aerosols Acidic, alkaline, organic gases, corrosive vapours
Mechanism Interception, impaction, diffusion Adsorption (activated carbon surface)
Typical product HEPA / ULPA high-efficiency ODOURFIL carbon filters
Failure signal Rising pressure drop Media saturation (time/concentration, not pressure)

The two are not interchangeable. A HEPA-only system removes particles, but odours and corrosive gases pass straight through.

◆ ◆ ◆

HEPA / ULPA: high and ultra-high efficiency

📄 产品资料:HEPA/ULPA High-Efficiency Filters

HEPA/ULPA high-efficiency filters use a separator-less (mini-pleat) construction for applications with strict particulate requirements.

The advantage of separator-less design is a smaller footprint at the same efficiency and more uniform pressure drop — useful where AHU or terminal space is constrained.

Testing uses PAO aerosol scanning for leak detection. This is the standard means of confirming a leak-free installation — installing without testing is not installing.

◆ ◆ ◆

ODOURFIL Series: two chemical filtration options

📄 产品资料:ODOURFIL-D Panel Carbon Filter

ODOURFIL-D panel activated carbon filter — for HVAC air handling units (AHU), as a gas-phase molecular contaminant control and corrosive gas control measure. Face velocity ≤1.0 m/s.

📄 产品资料:ODOURFIL-DF Fibrous Carbon Filter

ODOURFIL-DF fibrous carbon panel filter — fibrous activated carbon construction. Benefits: space-saving, reduced HVAC operating cost, easy installation and removal, improved indoor air quality, throwaway design, low particle shedding. Face velocity ≤2.5 m/s.

The key differences are carbon form and allowable face velocity. DF uses a fibrous structure with a higher velocity limit and lower shedding, ideal for cleanliness-sensitive systems; D is a panel construction for conventional AHU applications.

◆ ◆ ◆

Sequence matters

Standard sequence: pre-filter → medium → HEPA → chemical (if required) Upstream stages protect the downstream ones. Without effective pre- and medium filtration, HEPA filters clog with particles and chemical filters get coated, losing adsorption capacity — money spent, performance lost.

◆ ◆ ◆

Setting replacement intervals

· HEPA / ULPA: by pressure drop. Replace at twice the initial resistance (or the manufacturer value), not by calendar.

· Chemical filters: by elapsed time and concentration. Adsorption is consumptive — pressure drop barely rises, so it cannot be used as the indicator. Service hours and contaminant concentration must be calculated.

◆ ◆ ◆

Further reading

Full explanation of three-stage filtration: Pre, medium and HEPA filter stages explained.

Bag filter efficiency classes and maintenance: M-PACK bag filters G3-G9: classes and replacement.

Gas-phase capacity of chemical filters: Puro-Filt chemical filter series for acid, alkali and organic gases.

Product navigation: Air Filters | Environmental Safety

◆ ◆ ◆

延伸阅读

▸ 空气过滤器初效、中效、高效三级过滤系统详解 (中文)

▸ [WELL Lab] M-PACK Bag Filters: Efficiency Classes G3-F9

▸ 【维尔实验室】化学过滤器 Puro-Filt 系列:处理工业酸性、碱性、有机气体 (中文)

▸ [WELL Lab] WELL Protection Launches Global Sales: Vertical-Integrated PPE Manufacturer

Samples & technical support

zhimin.wang@well-protection.com / +86 182 1771 2651

Suzhou WELL New Safety Technology Co., Ltd. | WELL Protection

常见问题

Q&A

넳 넲