[WELL Lab] Chemical Protective Gloves: Three PHC Models for Three Contact Types

Disposable gloves stop you getting dirty. Chemical protective gloves stop you getting hurt.

The two are often confused. The first is a consumable; the second is professional protective equipment specified by breakthrough time.

Our PHC series has three main models, covering three different types of contact.

◆ ◆ ◆

The key concept: breakthrough time

Chemical gloves are not "thicker is better" — what matters is how long a given glove holds up against your specific chemical. The same glove may resist chemical A for 8 hours and chemical B for 10 minutes. Selection must be based on a chemical compatibility chart, never on feel.

This is why we supply chemical compatibility charts. It is a required step in selection, not an optional extra.

◆ ◆ ◆

PHC-020: nitrile rubber chemical gloves for routine handling

📄 产品资料:PHC-020 Nitrile Chemical Gloves

PHC-020 is a nitrile rubber chemical protective glove for routine chemical handling.

Nitrile performs well against greases, aliphatic hydrocarbons and some aromatics, making it one of the most widely used materials in the chemical industry.

For dosing, sampling, equipment maintenance and routine lab work — situations with some contact risk that do not require full liquid-tight containment.

◆ ◆ ◆

PHC-038: when the barrier requirement is higher

📄 产品资料:PHC-038 Chemical Protective Gloves

PHC-038 addresses scenarios needing a stronger chemical barrier.

Where concentrations are higher, or several chemicals pose a combined risk, protective selection should be based on permeation data rather than defaulting to a general model.

Which one to take depends on your chemical list — send us the SDS and we will advise on the match.

◆ ◆ ◆

PHC-045: nitrile glovebox gloves for contained work

📄 产品资料:PHC-045 Nitrile Glovebox Gloves

PHC-045 is a glovebox glove, designed for contained operations.

The use case is entirely different from ordinary chemical gloves: it is mounted on a glovebox or isolator, and the operator manipulates contents from outside the enclosure.

Applications include anaerobic/anhydrous work, handling of radioactive or highly toxic materials, and synthesis or encapsulation under inert atmosphere.

These gloves prioritise gas-tightness and long-term stability — a different technical path altogether from disposables.

◆ ◆ ◆

A three-step selection method

· Step 1: List every chemical contacted, including auxiliary reagents and cleaning agents.

· Step 2: Check the breakthrough time chart and select against the most aggressive chemical.

· Step 3: Identify the contact type — immersion, splash, or contained work — and pick PHC-020 / PHC-038 / PHC-045 accordingly.

◆ ◆ ◆

Further reading

The difference between disposables and chemical gloves: Nitrile, latex and PVC gloves compared.

Cleanroom applications require separate selection: Cleanroom glove ISO Class requirements.

Where mechanical hazards (cuts, burrs) are also present, cut-resistant gloves are needed — see Mechanical Protective Gloves.

◆ ◆ ◆

延伸阅读

▸ 丁腈、乳胶、PVC 一次性手套怎么选?材质差异与采购决策指南 (中文)

▸ [WELL Lab] PHD-018 40cm Extended Nitrile Gloves

▸ 【维尔实验室】洁净室手套 ISO Class 100 / ISO 5 等级含义与选购要点 (中文)

常见问题

Q&A

넳 넲