[WELL Lab] M-PACK Bag Filters: Efficiency Classes G3-F9 and Replacement Guide

By WELL Protection Technical Team

 

Bag filters are the most widely used pre-filters and fine filters in commercial HVAC and industrial ventilation. Compared with panel filters, bag filters hold more dust, build up resistance more slowly and last longer — the value choice for the "first line of defense". This article explains the M-PACK series from selection to maintenance.

 

1. Efficiency Classes of W-PACK

 

The M-PACK bag filter series covers G3, G4, M5, M6, F7, F8 and F9 under EN 779 / ISO 16890:

  • G3-G4 (coarse): captures >5μm particles — the commercial HVAC pre-filter stage with high dust-holding capacity.
  • M5-M6 (fine): captures 1-5μm particles — pre-filtration for hospitals and electronics.
  • F7-F9 (high fine): captures sub-micron particles — pre-filtration for cleanrooms and pharma.

 

2. Three Parameters When Buying

 

  1. Efficiency class: G3-G4 is enough for the pre-filter stage; F7-F9 for demanding clean applications.
  2. Number/depth of pockets: more and deeper pockets mean more filter area, higher dust-holding capacity and longer life.
  3. Frame material: galvanized steel (standard), aluminum (corrosion-resistant), plastic (lightweight) — choose corrosion-resistant frames in humid environments.

 

3. How to Judge Replacement Timing

 

  • Resistance method (most accurate): replace when the initial resistance doubles — pre-filters typically 3-6 months, fine filters 6-12 months.
  • Differential pressure alarm: replace on alarm.
  • Visual check: replace when the media looks blackened, damaged or deformed.
  • Cost of not replacing: lower airflow, 15-30% higher energy consumption, and premature failure of downstream HEPA filters.

 

4. About WELL Protection

 

WELL Protection is a vertically integrated manufacturer and supplies the full ESP air filtration range. Our factory is located in Xiantao, Hubei (China's nonwoven industry hub), with our sales office in Shanghai. Custom non-standard sizes and scheduled replacement supply agreements available. Selection and quotes: zhimin.wang@well-protection.com /     Mob: +86 18217712651.  (021) 6225 5575

 

Related Reading

Related Products

常见问题

Q&A

넳 넲